Implementing Cisco Quality of Service Certification Training Course Overview

QoS - Implementing Cisco Quality of Service Training provides students with the knowledge and skills to plan, execute, and troubleshoot Quality of Service on a network. This course also teaches about the necessary QoS technologies and applications for both Enterprise networks and Service Provider. Successful execution of the methods will have a remarkable impact on critical network application performance. This course helps you in the preparation of Cisco Exam 642-642 QoS.


Implementing Cisco Quality of Service (40 Hours) Download Course Contents

Instructor - Led Online Training Fee For Both Group Training & 1-on-1 Training 2300
Group Training

19,20,21,22,23 Apr
09:00 AM - 05:00 PM CST
(8 Hours/Day)

03,04,05,06,07 May
09:00 AM - 05:00 PM CST
(8 Hours/Day)

07,08,09,10,11 Jun
09:00 AM - 05:00 PM CST
(8 Hours/Day)

GTR=Guaranteed to Run
1-on-1 Training (GTR)
4 Hours
8 Hours
Week Days
Week End


Start Time : At any time

12 AM
12 PM


Classroom training is available in select Cities

Classroom Training (Available: London, Dubai, India, Sydney, Vancouver)
Duration : On Request
Fee : On Request
On Request

Special Solutions for Corporate Clients! Click here

Hire Our Trainers! Click here

Course Modules

  • Introduction to IP QoS
  • Understanding the Need for QoS
  • Understanding QoS
  • Implementing QoS
  • The Building Blocks of IP QoS
  • Identifying Models for Implementing QoS
  • The Integrated Services Model
  • The Differentiated Services Model
  • Identifying QoS Mechanisms
  • QoS in the Life of a Packet
  • Introduction to Modular QoS CLI and AutoQoS
  • Modular QoS CLI
  • Cisco AutoQoS VoIP
  • Cisco AutoQoS Enterprise
  • Classification and Marking
  • Understanding Classification and Marking
  • Using MQC for Classification
  • Using MQC for Class-Based Marking
  • Using NBAR for Classification
  • Configuring QoS Pre-Classify
  • Configuring QoS Policy Propagation Through BGP
  • Configuring LAN Classification and Marking
  • Congestion Management
  • Introducing Queuing
  • Understanding Queuing Implementations
  • Configuring FIFO and WFQ
  • Configuring CBWFQ and LLQ
  • Configuring LAN Congestion Management
  • Congestion Avoidance
  • Introducing Congestion Avoidance
  • RED
  • Configuring Class-Based Weighted RED
  • Configuring Explicit Congestion Notification
  • Traffic Policing and Shaping
  • Understanding Traffic Policing and Shaping
  • Configuring Class-Based Policing
  • Configuring Class-Based Shaping
  • Configuring Class-Based Shaping on Frame Relay Interfaces
  • Frame Relay Voice-Adaptive Traffic Shaping and Fragmentation
  • Link Efficiency Mechanisms
  • Understanding Link Efficiency Mechanisms
  • Configuring Class-Based Header Compression
  • Configuring Link Fragmentation and Interleaving
  • QoS Best Practices
  • Understanding Traffic Classification Best Practices
  • Deploying End-to-End QoS
  • Providing QoS for Security
  • Labs
  • Lab 1: QoS Lab Setup and Initialization
  • Initial router and switch configuration; familiarization with the lab environment.
  • Lab 2: Classification and Marking Using MQC
  • Configure MQC classification using ACLs. Configure and monitor Class-Based Marking
  • Lab 3: Classification Using NBAR
  • Configure NBAR protocol discovery. Configure MQC Classification via NBAR.
  • Lab 4: LAN-Based Packet Classification and Marking
  • Configure Catalyst trust boundaries and COS-to-DSCP mapping. Configure MQC classification and marking on Catalyst switch.
  • Lab 5: Configuring QoS Pre-Classify
  • Configure QoS pre-classify on a router using a GRE tunnel. Monitor the operation of QoS preclassification.
  • Lab 6: Configuring Basic Queuing
  • Configure FIFO queuing on WAN routers. Configure WFQ queuing on WAN routers. Measure and analyze network performance.
  • Lab 7: Configuring LLQ
  • Configure LLQ on a WAN router to provide bandwidth and latency guarantees. Measure and analyze the results.
  • Lab 8: Queuing on Catalyst Switches
  • Configure COS-to-queue mapping on the Catalyst 2950 switch. Configure and monitor WRR queuing on the Catalyst 2950.
  • Lab 9: Configuring DSCP-Based WRED
  • Configure and monitor DSCP-Based CB-WRED. Add Explicit Congestion Notification (ECN).
  • Lab 10: Configuring Class-Based Policing
  • Configure CB-Policing and analyze the results.
  • Lab 11: Configuring Class-Based Shaping
  • Configure CB-Shaping and analyze the results.
  • Lab 12: Configuring Class-Based Header Compression
  • Configure and monitor Class-Based RTP header compression on a PPP WAN link.
  • Lab 13: Configuring LFI
  • Configure and monitor link fragmentation and interleaving on a PPP WAN link .
  • Lab 14: Configuring QoS with AutoQoS for VoIP
  • Configure AutoQoS on WAN routers and monitor the results. Configure AutoQoS on Catalyst access switches and monitor the results.

Request More Information

Course Prerequisites



Upon Completion of this Course, you will accomplish following:

  • Comprehend the QoS Lab Initialization
  • Comprehend the Classification and Use of MQC
  • Comprehend the Classification with the use of NBAR
  • Configure QoS Pre-Classify
  • Configure FIFO queuing on WAN routers
  • Configure LLQ on a WAN router
  • Queuing on Catalyst Switches
  • Monitor DSCP-Based CB-WRED
  • Build CB-Policing and analyze the results.
  • Build CB-Shaping and analyze the results.
  • Configure Class-Based Header Compression
  • Monitor link fragmentation and interleaving on a PPP WAN link.

Give an edge to your career with Cisco certification training courses. Students can join the classes for QOS - Implementing Cisco Quality of Service Training & Certification Course at Koenig Campus located at New Delhi, Bengaluru, Shimla, Goa, Dehradun, Dubai & Instructor-Led Online.